Fabric service

The Fabric service is responsible to configure the fabric switches in ONOS.

At this point we assume you followed the Fabric seutp guide and your physical infrastructure is configured and ready to go.

How to configure fabric switches

Here is an example of how to configure a Switch a Port and an Interface on your fabric.

tosca_definitions_version: tosca_simple_yaml_1_0
imports:
  - custom_types/switch.yaml
  - custom_types/switchport.yaml
  - custom_types/portinterface.yaml
description: Configures fabric switches and related ports
topology_template:
  node_templates:
    switch#leaf1:
      type: tosca.nodes.Switch
      properties:
        driver: ofdpa3 # The driver used by the SDN controller
        ipv4Loopback: 192.168.0.201 # Fabric loopback interface
        ipv4NodeSid: 17 # The MPLS label used by the switch [17 - 1048576]
        isEdgeRouter: True # Whether is a leaf (True) or a spine (False)
        name: leaf1
        ofId: of:0000000000000001 # The unique OpenFlow ID of the fabric switch
        routerMac: 00:00:02:01:06:01 # MAC address of the fabric switch used for all interfaces

    # Setup a fabric switch port
    port#port1:
      type: tosca.nodes.SwitchPort
      properties:
        portId: 1 # The unique port OpenFlow port ID
      requirements:
        - switch:
            node: switch#leaf1
            relationship: tosca.relationships.BelongsToOne

    # Setup a fabric switch port interface
    interface#interface1:
      type: tosca.nodes.PortInterface
      properties:
        ips: 192.168.0.254/24 # The interface IP address (xxx.yyy.www.zzz/nm)
        name: port1
      requirements:
        - port:
            node: port#port1
            relationship: tosca.relationships.BelongsToOne

How to attach Compute Nodes to the Fabric

Assuming that you have the above mentioned fabric configuration and you want to attach a two compute nodes to the fabric, assuming that that:

• node1.cord.lab has ip 10.6.1.17 on interface fabricbridge and it is attached to port 17 on the switch leaf1 (and has a route like 10.6.2.0/24 via 10.6.1.254 dev fabricbridge or the default route is pointing to the fabric)
• node2.cord.lab has ip 10.6.2.18 on interface fabricbridge and it is attached to port 18 on the switch leaf1 (and has a route like 10.6.1.0/24 via 10.6.2.254 dev fabricbridge or the default route is pointing to the fabric)

you can use the following TOSCA recipe to:

• add the Nodes to XOS
• add the two Ports to the Switch
• associate each Node to a Port

tosca_definitions_version: tosca_simple_yaml_1_0
description: Set up Fabric service and attach it to ONOS (note that onos-service needs to be loaded)
imports:
  - custom_types/node.yaml
  - custom_types/nodetoswitchport.yaml
  - custom_types/switch.yaml
  - custom_types/switchport.yaml
  - custom_types/deployment.yaml
  - custom_types/site.yaml
  - custom_types/sitedeployment.yaml

topology_template:
  node_templates:

    # nodes
    node#node1:
        type: tosca.nodes.Node
        properties:
            dataPlaneIntf: fabricbridge
            dataPlaneIp: 10.6.1.17/24
            name: node1.cord.lab
        requirements:
            - site_deployment:
                node: site_deployment
                relationship: tosca.relationships.BelongsToOne

    node#node2:
        type: tosca.nodes.Node
        properties:
            dataPlaneIntf: fabricbridge
            dataPlaneIp: 10.6.2.18/24
            name: node2.cord.lab
        requirements:
            - site_deployment:
                node: site_deployment
                relationship: tosca.relationships.BelongsToOne

    # ports (defined in the above recipe)
    switch#leaf1:
      type: tosca.nodes.Switch
      properties:
        name: leaf1
        must-exist: true

    port#port17:
      type: tosca.nodes.SwitchPort
      properties:
        portId: 17
      requirements:
        - switch:
            node: switch#leaf1
            relationship: tosca.relationships.BelongsToOne

    port#port18:
      type: tosca.nodes.SwitchPort
      properties:
        portId: 18
      requirements:
        - switch:
            node: switch#leaf1
            relationship: tosca.relationships.BelongsToOne

    # attaching nodes to ports
    node1_to_port17:
        type: tosca.nodes.NodeToSwitchPort
        requirements:
            - port:
                node: port#port17
                relationship: tosca.relationships.BelongsToOne
            - node:
                node: node#node1
                relationship: tosca.relationships.BelongsToOne

    node2_to_port18:
        type: tosca.nodes.NodeToSwitchPort
        requirements:
            - port:
                node: port#port18
                relationship: tosca.relationships.BelongsToOne
            - node:
                node: node#node2
                relationship: tosca.relationships.BelongsToOne

    # extra setup required by XOS (note that this needs to be customized to your installation)
    mySite:
      type: tosca.nodes.Site
      properties:
          name: mySite
          login_base: opencord
          abbreviated_name: ms
          site_url: http://opencord.org/
          hosts_nodes: true

    myDeployment:
      type: tosca.nodes.Deployment
      properties:
        name: myDeployment

    site_deployment:
      type: tosca.nodes.SiteDeployment
      requirements:
        - site:
            node: mySite
            relationship: tosca.relationships.BelongsToOne
        - deployment:
            node: myDeployment
            relationship: tosca.relationships.BelongsToOne

This will cause the correct fabric configuration to be generated and pushed to the fabric.